 Technical Specifications of HIND 799 Self Propelled Combine Harvester |
Manufacturer |
: |
HIND AGRO Industries. (Regd.) Nabha, Punjab, INDIA. |
Model |
: |
HIND 799 |
Type |
: |
Self Propelled. |
Tested & Approved By |
: |
Govt. of INDIA, Ministry of Agriculture. |
Engine
|
Make |
: |
Ashok Leyland
|
Model |
: |
ALU 400 C2 / 3
|
Type |
: |
Four Stroke, Water Cooled, Direct Injection, Diesel Engine. |
Maximum Speed at no load (rpm) |
: |
2400
|
Rated Speed for fields (rpm) |
: |
1700
|
No. of Cylenders |
: |
6
|
Fuel Used |
: |
Diesel
|
Horse Power |
: |
110 (HP)
|
Fuel Pump Make |
: |
MICO LIC BOSCH
|
Fuel Tank
|
Diesel Capacity (Ltrs.) |
: |
380
|
Electrical System
|
System Voltage |
: |
24 v negative ground
|
Battery |
: |
12 v 100 ah
|
Alternator Output |
: |
24 volt
|
Grain Header / Cutter Bar |
Effective Cutter Bar width. (mm) |
|
4280 |
No. & Spacing of Guards |
|
58 (29 Pairs) 75 mm apart. |
NO. & Type of Knife Blades |
|
59, Serrated. |
Detail of Knife Drive |
|
End of Cutter Bar is connected with a Crank Arm to the Pitman Shaft and oscillated by a Crank Arm. |
Knife Safety Arrangment |
|
Knife Guard Provided. |
Knife Stroke (mm) |
|
75 |
Strokes Per Minute |
|
976 |
Knife Speed Corresponding to 1700 rpm of engine (m/sec.) |
|
1.2 |
Type of Crop Dividers |
|
Shoe |
Cutting Platform Auger
|
Type of Crop Conveyor |
: |
Auger with Retractable Fingers |
Size of Auger (mm) |
: |
Dia: 202 |
Width: 4255 |
Speed of the Auger corresponding to 1700 rpm of engine (rpm) |
: |
566 |
Threshing Drum |
: |
For Wheat |
For Paddy |
Type |
: |
Rasp Bar |
Peg Tooth |
Width (mm) |
: |
1210 |
1205 |
Outside Dia (mm) |
: |
574 |
428 |
Range of Speed Corresponding to 1750 rpm of Engine (rpm):
|
Minimum |
: |
625 |
625 |
Maximum |
: |
1140 |
1140 |
Peripheral Speed (m/sec.)
|
|
|
18.7 |
14.0 |
|
|
34.2 |
25.6 |
|
|
8 |
8 |
No. pegs/knife blade and their spacing on each bar |
|
-- |
17, 75 mm apart |
Length of rasp bar/peg bar (mm) |
|
1265 |
1256 |
Hieght of pegs (mm) |
|
-- |
67 |
No. of rasp/ 100 mm |
|
8 |
-- |
NO. of rasp on each bar |
|
94 |
-- |
No. and type of bearings |
|
4 sealed ball bearing |
Concave |
|
For Wheat |
For Paddy |
Overall width of Concave (mm) |
: |
1285 |
1285 |
Effective width (mm) |
: |
1260 |
1260 |
Type of Concave |
: |
Open Flat Bars |
Open Flat Bars with peg in 3 rows. |
No. of Bars |
: |
12 |
9 |
Straw Walkers |
Number |
: |
6 |
Type |
: |
Closed rack type. Serrated side edges with 6 steps on each straw walker. |
Cleaning Sieves
|
Top Sieves |
|
|
No. of Sieves |
: |
Two |
Type |
: |
Open Lip frog mouse type |
Overall size of sieves |
: |
Front |
Rear |
-Length (mm) |
: |
1445 |
810 |
-Width (mm) |
: |
1215 |
1215 |
Bottom Sieves |
|
|
No. of Sieves |
: |
One |
Type |
: |
Open Lip frog mouse type |
-Length (mm) |
: |
1445 |
-Width (mm) |
: |
1215 |
Cleaning Fan (Blower) |
|
|
Dia (mm) |
: |
575 |
Effective width (mm) |
: |
1260 |
No. & Type of Blades |
: |
4, Rectangular Shape |
Speed corresponding to 1700 rpm of Engine (rpm) |
: |
1036 |
Grain Tank |
|
|
Location |
: |
On Top of combine harvester, behind operator's seat. |
Capacity: |
|
|
Volume Basis (m3) |
: |
2.9 |
Mass Basis (kg) |
: |
1850 (with paddy) |
Overall Dimensions (mm) |
: |
Working |
Transportation |
Lendth |
: |
8165 |
12115 (with header) |
Width |
: |
4670 |
3070 |
Hight |
: |
3925 |
3925 |
Weight (kg) |
: |
8500 Kg. (Approx) |
